mechify Open studio

Grippers, arms and gantries, designed around your hardware.

Drop a part's CAD for printed fingers, or list your motors for an arm or gantry.

A four-axis arm designed around four GIM6010-8 motors A tabletop pick-and-place gantry Simulated 4 × GIM6010-8 · 0.2 kg at 250 mm · modeled 3-axis gantry · 300 × 160 × 100 mm · modeled

Three things Mechify designs.

Printed fingers have picked parts on a real cobot. Arms and gantries are modeled; none has been built yet.

Fingers: one CAD file in, a kit out.

Fits the gripper you have.

  • Robotiq Hand-E
  • Robotiq 2F-85
  • OnRobot RG2
  • OnRobot RG6
  • SCHUNK EGH
  • Your own hole pattern

Mounting holes checked against each maker's drawing. Print the small test tab first.

Printed fingers, tested on a real cobot.

  1. Printed
  2. Bolted on
  3. Picked the part

The 3D preview above is a simulation. Estimates are labelled.

Questions.

What does it cost?

The studio is free. If we set up a part with you, the first part is free. After that, a fixed price per part, agreed before we start.

Can it design a whole robot?

As a modeled design, yes: an arm around the motors you list, or a tabletop gantry or SCARA. You get printable parts, a parts list and a robot model. None has been built yet, so check sizes and bolt holes against your motor's drawing.

Which parts work?

Rigid parts a two-finger gripper can hold: blocks, housings, shafts, brackets. Not very thin, soft or tangled parts.

Which robots?

Programs for UR, FANUC, ABB, KUKA and Standard Bots, or joint waypoints to load on other arms. Dry run slowly first. This site never moves a robot.

What do I print the fingers in?

PETG or tougher, in the orientation they are exported in.

Can I edit the fingers?

Yes, in the studio, or open the STEP files in your own CAD.

Where does my CAD go?

It stays in your browser. It reaches us only if you send it with the request form.

Got a new part, or a box of motors?

Send the part: the first one is free and we help until it picks. Or design an arm now.