factorystudio. First part free Open the studio
From part CAD to print files

A new part on the cobot you already own.

Upload the part's CAD. Get gripper fingers shaped to it, a tray that holds it, and a robot program, sized for the gripper on your arm. Print the tooling overnight.

  • No sign-up
  • Runs in your browser
  • Real files to download
Example part

Simulated preview: drag to look around. Every number comes from the kit the tool generated for this part. They are estimates, not measurements.

How it works

Four steps from CAD to a kit you can print.

  1. Bring the part

    A STEP or STL file. It is read in your browser.

  2. Pick your gripper

    Mounting holes for common grippers come from the maker's drawing. Not listed? Enter the hole pattern or measure your jaw with the printable sheet.

  3. Check the result

    See the fingers on the part, the tray, which tray positions the arm reaches, and a bending estimate for the printed fingers.

  4. Download and print

    Print plates as STL and 3MF, a parts list, a setup sheet and a program in your robot's language.

Example kit

Download the real files. No form to fill in.

These are the files the tool made for the part selected above. Open them in your slicer before you decide anything.

Grippers and robots

Fingers that bolt to the jaw you already have.

For these grippers the hole pattern was checked against the maker's own drawing, with the source linked. None has been fit-checked on the hardware by us. Two of them take fingers that screw down onto an end face, which the tool cannot make yet: they are marked.

Robot program formats

  • UR.script
  • FANUC.ls
  • ABB.mod
  • KUKA.src + .dat
  • Standard Bots.py
  • Any armjoint waypoints

Programs are written from the planned motion and checked for format. Dry run slowly on your own controller first. Nothing is ever sent to a robot from this site.

Evidence

What is proven, and what is not.

Done on real hardware

  1. Printed
  2. Bolted on
  3. Picked the part

One pair of fingers was printed, bolted to a cobot gripper, and picked the part using taught points.

Simulated or estimated

  • Reach checks, robot motion and cycle time.
  • Print time and weight.
  • Finger bending numbers: a simple beam model with assumed material values, not a load rating.
  • Gripper hole patterns taken from drawings: check with the small test tab before printing the fingers.

That is why the first part is free: send the CAD, and we work on it with you until the robot picks it.

Your files

Where your CAD goes.

Questions

Short answers.

Do I need CAD skills?

No. You need the part's STEP or STL file and the name of your gripper.

What does it make?

Two gripper fingers shaped to the part, a tray with pockets for it, a small test tab for the mounting holes, a parts list, a setup sheet and a robot program.

Which parts work?

Rigid parts a two-finger parallel gripper can hold: blocks, housings, shafts, brackets, bushings. Very thin, soft or tangled parts are not a fit today.

What should I print the fingers in?

PETG or tougher, on their side as exported, so the layers run along the finger. Each kit has a print record sheet for your settings.

What does it cost?

The studio is free to use. If you want us to set up a part with you, the first part is free. After that it is a fixed price per part, agreed before we start.

Can I edit the fingers?

Yes. Adjust the grip, clearance and mounting in the studio, or open the STEP files in your own CAD.

Have a new part coming up?

Try it yourself, or send the CAD and we will set up the first one with you.